The buck–boost converter is a type of DC-to-DC converter that has an output voltage magnitude that is either greater than or less than the input voltage magnitude. It is equivalent to a flyback converter using a single inductor instead of a transformer.

Two different topologies are called buck–boost converter. Both of them can produce a range of output voltages, ranging from much larger (in absolute magnitude) than the input voltage, down to almost zero.


The output voltage is of the opposite polarity than the input. This is a switched-mode power supply with a similar circuit topology to the boost converter and the buck converter. The output voltage is adjustable based on the duty cycle of the switching transistor. One possible drawback of this converter is that the switch does not have a terminal at ground; this complicates the driving circuitry. However, this drawback is of no consequence if the power supply is isolated from the load circuit (if, for example, the supply is a battery) because the supply and diode polarity can simply be reversed. When they can be reversed, the switch can be on either the ground side or the supply side



Buck - Boost DC to DC Converter MATLAB Simulink

SKU: MS_0014
  • 1. Complete Simulink File (.slx & .mdl)

    2. Satisfactory Results

    3. Universal Design (Accept All inputs)

    4. Can Take Case Studies

    5. Operates on All MATLAB Version

    6. Easy to Understand all blocks

    7. Can take waveforms & readings

    8. Instruction Manual

    9. Technical Helpline Number

    10. Digital Files (Access Anywhere)