The three phase fully controlled bridge converter has been probably the most widely used power electronic converter in the medium to high power applications. Three phase circuits are preferable when large power is involved. The controlled rectifier can provide controllable out put dc voltage in a single unit instead of a three phase autotransformer and a diode bridge rectifier. The controlled rectifier is obtained by replacing the diodes of the uncontrolled rectifier with thyristors. Control over the output dc voltage is obtained by controlling the conduction interval of each thyristor. This method is known as phase control and converters are also called “phase controlled converters”. Since thyristors can block voltage in both directions it is possible to reverse the polarity of the output dc voltage and hence feed power back to the ac supply from the dc side. Under such condition the converter is said to be operating in the “inverting mode”. The thyristors in the converter circuit are commutated with the help of the supply voltage in the rectifying mode of operation and are known as “Line commutated converter”. The same circuit while operating in the inverter mode requires load side counter emf. for commutation and are referred to as the “Load commutated inverter”

3-Phase Fully Control Rectifier MATLAB Simulink

SKU: MS_0015
₹700.00Price
  • 1. Complete Simulink File (.slx & .mdl)

    2. Satisfactory Results

    3. Universal Design (Accept All inputs)

    4. Can Take Case Studies

    5. Operates on All MATLAB Version

    6. Easy to Understand all blocks

    7. Can take waveforms & readings

    8. Instruction Manual

    9. Technical Helpline Number

    10. Digital Files (Access Anywhere)

preview.png.jpeg